Reed Chester's 427 LA Exotics Cobra Project
LA Exotics Cobra at Road America 
Parts and Bill-Of-Materials Page 3/7/02
Basic Information (Updated 3/14/02)(Updated 3/16/02)
Performer RPM Intake Manifold Machined for PCV Plate, 76CC Edelbrock heads with std exh bolt patn (no Changes)(we will increase 76 to 80/82CC), 4.233 std service 427 block being sleeved back to std. Cam spec interested in is .576/.595 Engle Solid(now updated to Comp Cam .581/.581 252EX/244IN 110C/L Solid). Needs side Oiler rear o/p relief spring, Heads to have Ferrea Valves possibly 2.190 x 1.700(Updated to 2.190 x 1.665), Has JE Std Pistons now, Unknown negative CC's and Compression Distance (CD or CH)(CD is 1.670 as of 3/14) , Needs Dove R/A's system, Head studs with 12 pt nuts. Additional changes and modification in new 3/14/07 revised BOM.
Need to Confirm -6CC Piston Information
Revised JE Piston Info received 3/15/02 @ -12CC
76CC
Heads @ -12CC JE's = 10.13:1 (Final Version)
80CC
Heads @ -12CC JE's = 9.8:1(Leave at 76CC above)
Comp Cam Camshaft Spec Card 4/30/02
Ferrea Valves 
Pressure
Checking Heads
Revised BOM 3/14/02
Date: 3/14/02 Customer: Reed Chester Current FE 01/2002 |
||||
Job #: estimate Engine Type: 427 Service Block Engine Year: 4.233 |
||||
QTY |
DESCRIPTION |
PRICE |
TOTAL |
|
Block Labor Options |
||||
Head Labor Options |
- |
|||
2 |
2 |
Pressure Check Aluminum Heads (____) (____) |
38.00 |
76.00 |
16 |
16 |
Finish Guide Clearance for Ferrea 3/8" 6000 Series Valves |
5.50 |
88.00 |
8 |
8 |
Machine Edelbrock 76CC (427 6008) Heads For Big Valves As Follows |
9.00 |
72.00 |
Intakes From 2.09" To 2.190" And Exhaust Lease as 1.665" |
- |
|||
8 |
8 |
Final Grind Valves & Seat Three Angle 2002/2003 Performance |
24.00 |
192.00 |
Intake: 20/30/45 Deg. And Exhaust: 30/45 Deg. (Or As Required) |
- |
|||
2 |
2 |
Bowl Blending and port matching work as reqd (estimate on Edelbrock) |
124.00 |
248.00 |
and do other assembly mods we do to Edelbrock heads |
- |
|||
8 |
8 |
Machine Mill Edelbrock 76CC 427 heads to 80CC's (Incls Chamber blending) |
36.00 |
288.00 |
We'll go for 82CC depending on the JE Pistons being -6CC or smaller |
- |
|||
2 |
Machine Edelbrock Heads For Big Springs (As Required-Springs Unknown) |
52.50 |
- |
|
2 |
2 |
Final Clean Heads & Parts For Assembly |
24.00 |
48.00 |
2 |
2 |
Assemble Heads at __.____" For ______# Per Cam Spec card And Spring -- |
- |
|
Part Number ___________ (Spring Mfg. ________________) |
- |
|||
2 |
2 |
Restrict Edelbrock Head Rocker Oiling .090 Drilled Aluminum Plug |
18.00 |
36.00 |
8 |
Machine Mill Edelbrock 76CC 427 heads to 80CC's (Incls Chamber blending) |
36.00 |
- |
|
1 |
1 |
Pressure Check Aluminum Intake Manifold |
48.00 |
48.00 |
1 |
1 |
Macine Edelbrock Intake for PCV Plate |
85.00 |
85.00 |
Total Labor Required As Listed Above |
1,181.00 |
|||
************************************************************************************ |
||||
Part List Options/Requirements |
||||
1 |
1 |
4261M-20 Main Bearing Set (1964/78) (May go with Upgrade 125M-20 +$ |
61.09 |
61.09 |
1 |
1 |
8-7170CH-20 Performance Rod Bearing Set or CB760P-20 |
63.97 |
63.97 |
- |
||||
Roller Rocker Systems |
- |
|||
1 |
1 |
DOVE/Comp Roller Rocker Arm Sets W/Shafts & End Supports 1046HD-KIT |
875.00 |
875.00 |
Dove will be 825 and Comp 875 depending on availability(Will Be Comp) |
- |
|||
- |
||||
Camshaft & Lifter Options |
- |
|||
- |
||||
1 |
1 |
Comp Cams Solid Lifter Cam Kits |
425.00 |
425.00 |
9.157 -.050, -.0100 or -.150 Push Rods (as required) Smith Bros later) -.100 ?? |
12.50 |
- |
||
Will get Reed connected with Smith Bros later (Maybe 5/16" x .083 Wall) |
- |
|||
2 |
2 |
22470 Moroso Performance Oil Filters (one For Assembly Test Run + One) |
10.00 |
20.00 |
Other Options |
- |
|||
1 |
1 |
427 Side Oiler Block Pressure relief Spring |
23.00 |
23.00 |
Cylinder Head Valve Train Components |
- |
|||
2 |
2 |
Felpro 1020 head Gaskets |
35.17 |
70.34 |
1 |
1 |
260-1025 Felpro Base gasket set (Jobber 62.75) Sell 52$ |
52.00 |
52.00 |
8 |
8 |
Ferrea F6215 Intake Valves 2.190 3/8" 5.450" .330 Tip 6000 Series 3/1/02$ |
16.00 |
128.00 |
8 |
8 |
Ferrea F6212 Exhaust Valves 1.655 3/8" 5.534" .330 Tip 6000 Series |
16.00 |
128.00 |
1 |
1 |
Comp 4700, 4770 or 4772 Spring Locator Cups For Heads |
28.80 |
28.80 |
- |
||||
1 |
1 |
Dove PCV Kit For FE's W/Rear Hole Incls Canister/Mesh/Plate & PCV Valve |
78.00 |
78.00 |
Fasteners For Engine Assembly |
- |
|||
1 |
1 |
ARP Head Stud Kit 155-4001 W/Hex Nuts (May use some 12Pt Nuts) |
110.81 |
110.81 |
2 |
2 |
ARP 300-8334 12PT Head Stud Nuts (10 Packs) Reqd Some FE Alum Hds |
23.39 |
46.78 |
- |
||||
1 |
1 |
Edelbrock 7105 Performer Intake Manifold |
313.92 |
313.92 |
- |
||||
1 |
1 |
Allow inbound UPS on non-stock parts above |
35.00 |
35.00 |
1 |
1 |
Allow outbound UPS on parts to Itasca IL (Heads in Wood Boxes) |
65.00 |
65.00 |
See http://www.gessford.com/cobraparts/fords.htm For Addl. Parts Prices |
||||
Total Parts Required As Listed Above |
2,524.71 |
|||
Total Quote For This Engine Job (Parts & Labor) |
3,705.71 |
|||
All Prices Subject To Change |
||||
05/21/02