Budget Cobra 428 Project
Arias Pistons & Rings arrive 7/15/02
***********************************
Bill-Of-Materials 428 Short Block
revised 7/29/02(7/31/02)
Date: 5/8/02(revised 5/26/02) Customer: Budget 428 Current FE 05/2002 |
||||
Job #:Estimate Engine Type: 428 Short Blk Engine Year: |
||||
Updated 7/29/02(Revised again 7/31/02) |
||||
QTY |
DESCRIPTION |
PRICE |
TOTAL |
|
Block Labor Options |
||||
1 |
1 |
Clean Iron Cylinder Block |
62.00 |
62.00 |
1 |
1 |
Magna Flux Cylinder Block OK) |
54.00 |
54.00 |
5 |
5 |
Remove & Replace Cam Bearings (1445M) |
9.00 |
45.00 |
8 |
8 |
Bore Block .040 For Piston Arias at 85# Torque W/ARP Lube ARP Head Studs |
26.00 |
208.00 |
Piston Clearance .004 Measured at 1.100 Using Deck Plate |
- |
|||
1 |
1 |
Drill 3/8" Oil Pump Passage to 1/2" & Chamfer. Port Match Oil Filter Bkt to |
118.00 |
118.00 |
Block & Chamfer, Drill Out Center Rear Plug & Replug. Align Main Bearing |
- |
|||
Oil Holes Using New Main Bearings as Required.(our FE Oiling Mods) |
- |
|||
1 |
1 |
Align Bore Block ____# Torque W/______ Lube |
168.00 |
168.00 |
1 |
1 |
Square Deck On Block at 10.156" (Stock FE Deck is 10.170") |
145.00 |
145.00 |
1 |
1 |
Thread Rear Oil Galley Plugs (Original Press In Style) |
24.00 |
24.00 |
1 |
1 |
Sonic Check Iron Block & Pressure Check Block (OK) |
65.00 |
65.00 |
1 |
1 |
Install Oil Galley Plugs only - customer to do frost and cam plug |
18.00 |
18.00 |
Crank Labor Options |
- |
|||
1 |
1 |
Clean Crankshaft Forge # 1UB or 1U as available |
19.00 |
19.00 |
1 |
1 |
Magna Flux Crankshaft (OK) |
28.00 |
28.00 |
1 |
1 |
Check Alignment (OK in spec) No Charge |
- |
|
1 |
1 |
Check & Grind Crankshaft R:0100 M:010 Radius: 5/64 Performance specs |
114.50 |
114.50 |
Connecting Rod Labor Options & Required Operations |
- |
|||
8 |
8 |
Install Arias Pistons On Connecting Rods (Floaters) |
8.00 |
64.00 |
8 |
8 |
Clean New Eagle Rods, when received to check,and to chk brg, and to ship |
10.50 |
84.00 |
8 |
8 |
Fit Pin Single Fit new Arias pins to Eagle bushings .0006/.0008" |
6.00 |
48.00 |
8 |
8 |
Check Big End @ 63# W/ARP Lube and Light Dust big ends to spec |
8.50 |
68.00 |
Other Labor |
- |
|||
1 |
1 |
Surface Grind Flywheel And Check Run Out (Even on new flywheels) we did it! |
18.00 |
18.00 |
Dummy Engine Assembly To Check All Clearances As Follows: |
- |
|||
Mandatory Operations, Prior to Engine Balancing & Building For All Engine |
- |
|||
1 |
1 |
Do final clean on block for assembly (3 hrs min) |
118.00 |
118.00 |
1 |
1 |
Install Crankshaft Main Bearings In Housing Bore At Correct Torque _____ |
124.00 |
124.00 |
Of ______# Using Bolt/Stud Lube _______, To Obtain Size To Grind |
- |
|||
Crankshaft Mains _______ For Clearance Of .0022/.0025" |
- |
|||
8 |
8 |
Install Connecting Rod Bearings In Rods At Correct Torque _____ W/Lube |
12.50 |
100.00 |
Of _____, And Obtain Size To Grind Crankshaft To For Clearance Of .0___" |
- |
|||
If New Rods Or Reconditioned Check The Tang Cut In The Rods For --- |
- |
|||
Correct bearing Fit In The Cap And In The Rod - (Correct If Required) |
- |
|||
8 |
8 |
File Fit Rings for 4.170 Bore (Top .020 2nd .018 Oil Rails OK) |
8.00 |
64.00 |
1 |
1 |
Balance Engine Rotating Assy Complete (Bob Weight _________) |
285.00 |
285.00 |
- |
||||
Total Labor Required As Listed Above |
2,041.50 |
|||
******************************************************************************** |
||||
Part List Options/Requirements |
||||
1 |
1 |
125M-10 F/M Performance main brg set .0025 clrc avr) |
61.09 |
61.09 |
1 |
4020M- ____ Main Brg Set (1958/63) |
86.00 |
- |
|
1 |
8-7170CH-____ Performance Rod Bearing Set (Std,1's,1X's & 10's) |
63.97 |
- |
|
8 |
8 |
CB760P-10 Mich 77 Rod Bearings (.0025 Clrc avr) |
3.95 |
31.60 |
1 |
1 |
1445M Cam Bearings (Std FE Blocks)or Alternate Dura Bond F33,FP33, FP33T |
22.22 |
22.22 |
F-33 22.22$, FP-33 40.41$(Perf) or FP-33T 64.55$ (Perf Coated) |
||||
1 |
1 |
260-1035 Base Felpro Gasket Rebuild Set |
62.85 |
62.85 |
1 |
1 |
1247 Felpro Intake Gasket or Upgrade to Victor Nitro Seal 95159SG |
22.94 |
22.94 |
2 |
2 |
1020 Felpro Head Gaskets (Aluminum FE Heads) |
35.17 |
70.34 |
1 |
1 |
SCE 4034 Pro-Copper Embossed Exhaust Gasket Set (FE) |
39.10 |
39.10 |
1 |
Felpro OS11701C Additional Pan Gasket For Windage Tray Applications |
8.77 |
- |
|
1 |
1 |
Brass Frost Plug Set 381-8017 plus extra 1/4" short Ford version Plugs (5) |
9.75 |
9.75 |
1 |
Comp 3108 HI-TECH Dbl Roller Race Set O/S Rollers |
52.93 |
- |
|
1 |
224-61114 HD Oil Pump Shaft (FE's) |
7.65 |
- |
|
1 |
1 |
224-41177 F/M Hi-Vol Oil Pump |
55.46 |
55.46 |
Pistons As Required For Compression Ratio And Application |
- |
|||
1 |
1 |
Arias In Stock 428 Pistons 4.170 Bore (New 2002) -11.5CC |
580.00 |
580.00 |
Includes: .975 x 2.925 Pins 97586202925, (16) Retainers 990043S |
||||
Ring Set As Required For Application |
- |
|||
1 |
1 |
Arias Ductile Plasma Moly 1/16 1/16 3/16 4.170 182131-4.170(or Total Seal) |
168.00 |
168.00 |
Camshaft & Lifter Options |
- |
|||
- |
||||
1 |
Comp Cams Solid Lifter Cam Kits Starting at 400$ Talk to Rick on This?? |
400.00 |
- |
|
16 |
9.157 -.050, -.0100 or -.150 Push Rods (as required) 3/8" NASCAR |
12.50 |
- |
|
as above but 5/16 x .080 wall Performance |
10.50 |
- |
||
1 |
1 |
Engine Oil Supplement for Break-In 1052367 (1/3 in Filter & 2/3 in Oil) |
6.15 |
6.15 |
- |
||||
2 |
22470 Moroso Performance Oil Filters (one For Assembly Test Run + One) |
10.00 |
- |
|
- |
||||
1 |
BHJ SFI Dampner (Neutral FE) FO-IBFE-7 |
288.00 |
- |
|
1 |
Ford B8AZ-6359-A Seal Tube (Behind Dampner) Customer Sleeve OK |
98.50 |
- |
|
1 |
ARP 150-2501 Dampner Bolt 5/8" 189# W/ARP Lube |
19.95 |
- |
|
1 |
378704-S Long Crankshaft Key (Ford FE) |
3.95 |
- |
|
1 |
1/4 x 1/4 x 3/4" Long Dampner Key |
2.00 |
- |
|
1 |
690-032 Brass Pilot Bushing (Rear FE's For Manual Trans) |
7.25 |
- |
|
- |
||||
Transmission/Bell Housing/Clutch |
- |
|||
1 |
(Pressure Plate) Customer to send their Clutch for our Balancing<<<<<<<< |
- |
||
1 |
1 |
ARP 150-2201 Pressure Plate Bolt set 5/16" 21# W/ARP Lube |
9.95 |
9.95 |
Flywheel/Flexplate |
- |
|||
1 |
1 |
Flywheel (External Balance) 428's Customer to send their Flywheel <<<<<<<< |
- |
|
Flywheel Bolts - see parts below |
- |
|||
Other Options |
- |
|||
1 |
FE Ford Oil Filter Adapter (Stock) 427 COAZ-A |
43.47 |
- |
|
1 |
Ford FMS M6881-C100 Remote Oil Filter Kit (Sgl Filter) W/Hoses & Ftgs. |
69.95 |
- |
|
1 |
Aviaid 55410 Oil Pan 9Qt W/P-Up & Windage Tray - Street & Race |
575.00 |
- |
|
1 |
Aluminum Caps For Both Dry Sump & Alt Dip Stick Pipes |
28.00 |
- |
|
1 |
Edelbrock FE Water Pump (Aluminum) |
159.99 |
- |
|
1 |
March 1910 Sgl Groove Pulley Set (Aluminum) |
199.00 |
- |
|
1 |
Water Pump Pulley Bolts 5/16-24 3/16Key Chromenet (4) (Clean Looking) |
2.00 |
- |
|
4 |
4 |
FP485 Deck Dowels For FE Block Decks (Installed) |
0.39 |
1.56 |
1 |
_____-_____ Ford OEM Cam Plate Retainer |
45.00 |
- |
|
1 |
FE Fuel Pump Eccentric |
45.00 |
- |
|
Fasteners For Engine Assembly |
- |
|||
1 |
255-1002 ARP Cam Bolt (see New Cam Plate Above)190PSI PRO Series |
5.95 |
- |
|
1 |
Gessford Special washer for Cam Bolts |
12.00 |
- |
|
1 |
1 |
ARP 155-5201 MBK Main Bolt Kit |
55.82 |
55.82 |
1 |
ARP 155-3601 Head Bolt Set W/Washers |
69.95 |
- |
|
1 |
1 |
ARP 100-2801 FE Flywheel Bolts (Didn't like ones provided by Customer 7/29 |
9.95 |
9.95 |
ARP Flywheel bolts are to be installed using 60# Torque W/ARP Lube |
- |
|||
1 |
1 |
ARP 100-9903 Large Tube ARP Lube |
7.10 |
7.10 |
- |
||||
Block/Crankshaft/Rods Castings (Donor Engine Castings) |
- |
|||
- |
||||
1 |
1 |
428 Ford FE Block that's rebuildable @ .040 |
1,000.00 |
1,000.00 |
1 |
1 |
428 Ford 1U or 1UB Cast Crank Core That's rebuildable 10/10 |
500.00 |
500.00 |
These cores have be prechecked to ensure they are good and you will be |
- |
|||
charged for this labor if you select this option in Labor section above. |
- |
|||
New FE Engine Components Available |
- |
|||
1 |
1 |
Eagle 6.490 H-Beam Steel Connecting Rods CRS6490F3D |
689.00 |
689.00 |
- |
||||
1 |
1 |
Freight Allowance on In Bound Parts |
30.00 |
30.00 |
1 |
1 |
Freight Allowance on Out Bound Parts plus boxing |
350.00 |
350.00 |
See http://www.gessford.com/cobraparts/fords.htm For Addl. Parts Prices |
||||
Total Parts Required As Listed Above |
3,782.88 |
|||
Total Quote For This Engine Job (Parts & Labor) |
5,824.38 |
|||
All Prices Subject To Change |
||||
revised 5/26/02
Date: 5/8/02(revised 5/26/02) Customer: Budget 428 Current FE 05/2002 |
||||
Job #:Estimate Engine Type: 428 Short Blk Engine Year: |
||||
QTY |
DESCRIPTION |
PRICE |
TOTAL |
|
Block Labor Options |
||||
1 |
1 |
Clean Iron Cylinder Block _____-_____-__ |
62.00 |
62.00 |
1 |
1 |
Magna Flux Cylinder Block (___) |
54.00 |
54.00 |
5 |
5 |
Remove & Replace Cam Bearings (________) |
9.00 |
45.00 |
8 |
8 |
Bore Block .040 For Piston Arias at _____# Torque W/______ Lube |
26.00 |
208.00 |
Piston Clearance ________ Measured at __________ Using Deck Plate |
- |
|||
1 |
1 |
Drill 3/8" Oil Pump Passage to 1/2" & Chamfer. Port Match Oil Filter Bkt to |
118.00 |
118.00 |
Block & Chamfer, Drill Out Center Rear Plug & Replug. Align Main Bearing |
- |
|||
Oil Holes Using New Main Bearings as Required.(our FE Oiling Mods) |
- |
|||
1 |
1 |
Align Bore Block ______# Torque W/______ Lube |
168.00 |
168.00 |
1 |
1 |
Square Deck On Block at 10.155/10.160" (Stock FE Deck is 10.170") |
145.00 |
145.00 |
1 |
1 |
Thread Rear Oil Galley Plugs (Original Press In Style) |
24.00 |
24.00 |
1 |
1 |
Sonic Check Iron Block (Can be higher depending on documentation's) |
65.00 |
65.00 |
- |
||||
Crank Labor Options |
- |
|||
1 |
1 |
Clean Crankshaft Forge # 1UB or 1U as available |
19.00 |
19.00 |
1 |
1 |
Magna Flux Crankshaft (____) |
28.00 |
28.00 |
1 |
1 |
Check Alignment (________________) Align If Required (Time x $) |
34.00 |
34.00 |
1 |
1 |
Check & Grind Crankshaft R:____ M:____ Radius: _____ |
114.50 |
114.50 |
Connecting Rod Labor Options & Required Operations |
- |
|||
8 |
8 |
Install Arias Pistons On Connecting Rods (Floaters) |
8.00 |
64.00 |
8 |
8 |
Clean New Eagle Rods, when received to check,and to chk brg, and to ship |
10.50 |
84.00 |
8 |
8 |
Fit Pin Single Fit new Arias pins to Eagle bushings .0006/.0008" |
6.00 |
48.00 |
8 |
8 |
Check Big End @ 63# W/ARP Lube and Light Dust big ends to spec |
8.50 |
68.00 |
Other Labor |
- |
|||
1 |
1 |
Surface Grind Flywheel And Check Run Out (Even on new flywheels) |
18.00 |
18.00 |
Dummy Engine Assembly To Check All Clearances As Follows: |
- |
|||
Mandatory Operations, Prior to Engine Balancing & Building For All Engine |
- |
|||
1 |
1 |
Do final clean on block for assembly (3 hrs min) |
118.00 |
118.00 |
1 |
1 |
Install Crankshaft Main Bearings In Housing Bore At Correct Torque _____ |
124.00 |
124.00 |
Of ______# Using Bolt/Stud Lube _______, To Obtain Size To Grind |
- |
|||
Crankshaft Mains _______ For Clearance Of .0___" |
- |
|||
8 |
8 |
Install Connecting Rod Bearings In Rods At Correct Torque _____ W/Lube |
12.50 |
100.00 |
Of _____, And Obtain Size To Grind Crankshaft To For Clearance Of .0___" |
- |
|||
If New Rods Or Reconditioned Check The Tang Cut In The Rods For --- |
- |
|||
Correct bearing Fit In The Cap And In The Rod - (Correct If Required) |
- |
|||
- |
||||
1 |
1 |
Balance Engine Rotating Assy Complete (Bob Weight _________) |
285.00 |
285.00 |
- |
||||
Total Labor Required As Listed Above |
1,993.50 |
|||
******************************************************************************** |
||||
Part List Options/Requirements |
||||
1 |
1 |
4261M-____ Main Bearing Set (1964/78) or Alternate MS863P-__ Mich 77 |
61.09 |
61.09 |
1 |
4020M- ____ Main Brg Set (1958/63) |
86.00 |
- |
|
1 |
8-7170CH-____ Performance Rod Bearing Set (Std,1's,1X's & 10's) |
63.97 |
- |
|
8 |
8 |
3230CP-___ Rod Bearings or Alternate CB760P-__ Mich 77 Rod Bearings |
3.95 |
31.60 |
1 |
1 |
1445M Cam Bearings (Std FE Blocks)or Alternate Dura Bond F33,FP33, FP33T |
22.22 |
22.22 |
F-33 22.22$, FP-33 40.41$(Perf) or FP-33T 64.55$ (Perf Coated) |
||||
1 |
1 |
260-1035 Base Felpro Gasket Rebuild Set |
62.85 |
62.85 |
1 |
1 |
1247 Felpro Intake Gasket or Upgrade to Victor Nitro Seal 95159SG |
22.94 |
22.94 |
2 |
2 |
1020 Felpro Head Gaskets (Aluminum FE Heads) |
35.17 |
70.34 |
1 |
1 |
SCE 4034 Pro-Copper Embossed Exhaust Gasket Set (FE) |
39.10 |
39.10 |
1 |
Felpro OS11701C Additional Pan Gasket For Windage Tray Applications |
8.77 |
- |
|
1 |
1 |
Brass Frost Plug Set 381-8017 plus extra 1/4" short Ford version Plugs (5) |
9.75 |
9.75 |
1 |
Comp 3108 HI-TECH Dbl Roller Race Set O/S Rollers |
52.93 |
- |
|
1 |
224-61114 HD Oil Pump Shaft (FE's) |
7.65 |
- |
|
1 |
1 |
224-41177 F/M Hi-Vol Oil Pump |
55.46 |
55.46 |
Pistons As Required For Compression Ratio And Application |
- |
|||
1 |
1 |
Arias In Stock 428 Pistons 4.170 Bore (New 2002) -11.5CC |
580.00 |
580.00 |
Includes: .975 x 2.925 Pins 97586202925, (16) Retainers 990043S |
||||
Ring Set As Required For Application |
- |
|||
1 |
1 |
Arias Ductile Plasma Moly 1/16 1/16 3/16 4.170 182131-4.170(or Total Seal) |
168.00 |
168.00 |
Camshaft & Lifter Options |
- |
|||
- |
||||
1 |
Comp Cams Solid Lifter Cam Kits Starting at 400$ Talk to Rick on This?? |
400.00 |
- |
|
16 |
9.157 -.050, -.0100 or -.150 Push Rods (as required) 3/8" NASCAR |
12.50 |
- |
|
as above but 5/16 x .080 wall Performance |
10.50 |
- |
||
1 |
1 |
Engine Oil Supplement for Break-In 1052367 (1/3 in Filter & 2/3 in Oil) |
6.15 |
6.15 |
- |
||||
2 |
22470 Moroso Performance Oil Filters (one For Assembly Test Run + One) |
10.00 |
- |
|
- |
||||
1 |
BHJ SFI Dampner (Neutral FE) FO-IBFE-7 |
288.00 |
- |
|
1 |
1 |
Ford B8AZ-6359-A Seal Tube (Behind Dampner) |
98.50 |
98.50 |
1 |
ARP 150-2501 Dampner Bolt 5/8" 189# W/ARP Lube |
19.95 |
- |
|
1 |
378704-S Long Crankshaft Key (Ford FE) |
3.95 |
- |
|
1 |
1/4 x 1/4 x 3/4" Long Dampner Key |
2.00 |
- |
|
1 |
690-032 Brass Pilot Bushing (Rear FE's For Manual Trans) |
7.25 |
- |
|
- |
||||
Transmission/Bell Housing/Clutch |
- |
|||
1 |
(Pressure Plate) Customer to send their Clutch for our Balancing<<<<<<<< |
- |
||
1 |
1 |
ARP 150-2201 Pressure Plate Bolt set 5/16" 21# W/ARP Lube |
9.95 |
9.95 |
Flywheel/Flexplate |
- |
|||
1 |
1 |
Flywheel (External Balance) 428's Customer to send their Flywheel <<<<<<<< |
- |
|
Flywheel Bolts - see parts below |
- |
|||
Other Options |
- |
|||
1 |
FE Ford Oil Filter Adapter (Stock) 427 COAZ-A |
43.47 |
- |
|
1 |
Ford FMS M6881-C100 Remote Oil Filter Kit (Sgl Filter) W/Hoses & Ftgs. |
69.95 |
- |
|
1 |
Aviaid 55410 Oil Pan 9Qt W/P-Up & Windage Tray - Street & Race |
575.00 |
- |
|
1 |
Aluminum Caps For Both Dry Sump & Alt Dip Stick Pipes |
28.00 |
- |
|
1 |
Edelbrock FE Water Pump (Aluminum) |
159.99 |
- |
|
1 |
March 1910 Sgl Groove Pulley Set (Aluminum) |
199.00 |
- |
|
1 |
Water Pump Pulley Bolts 5/16-24 3/16Key Chromenet (4) (Clean Looking) |
2.00 |
- |
|
4 |
4 |
FP485 Deck Dowels For FE Block Decks |
0.39 |
1.56 |
1 |
_____-_____ Ford OEM Cam Plate Retainer |
45.00 |
- |
|
1 |
FE Fuel Pump Eccentric |
45.00 |
- |
|
Fasteners For Engine Assembly |
- |
|||
1 |
255-1002 ARP Cam Bolt (see New Cam Plate Above)190PSI PRO Series |
5.95 |
- |
|
1 |
Gessford Special washer for Cam Bolts |
12.00 |
- |
|
1 |
1 |
ARP 155-5201 MBK Main Bolt Kit |
55.82 |
55.82 |
1 |
ARP 155-3601 Head Bolt Set W/Washers |
69.95 |
- |
|
1 |
ARP 100-2801 FE Flywheel Bolt Set |
9.95 |
- |
|
1 |
1 |
ARP 100-9903 Large Tube ARP Lube |
7.10 |
7.10 |
- |
||||
Block/Crankshaft/Rods Castings (Donor Engine Castings) |
- |
|||
- |
||||
1 |
1 |
428 Ford FE Block that's rebuildable @ .040 |
1,000.00 |
1,000.00 |
1 |
1 |
428 Ford 1U or 1UB Cast Crank Core That's rebuildable 10/10 |
500.00 |
500.00 |
These cores have be prechecked to ensure they are good and you will be |
- |
|||
charged for this labor if you select this option in Labor section above. |
- |
|||
New FE Engine Components Available |
- |
|||
1 |
1 |
Eagle 6.490 H-Beam Steel Connecting Rods CRS6490F3D |
689.00 |
689.00 |
- |
||||
1 |
1 |
Freight Allowance on In Bound Parts |
30.00 |
30.00 |
1 |
1 |
Freight Allowance on Out Bound Parts plus boxing |
215.00 |
215.00 |
See http://www.gessford.com/cobraparts/fords.htm For Addl. Parts Prices |
||||
Total Parts Required As Listed Above |
3,736.43 |
|||
Total Quote For This Engine Job (Parts & Labor) |
5,729.93 |
|||
All Prices Subject To Change |
||||
mailto:george@gessford.com George
http://www.gessford.com/cobraparts/fords.htm
08/07/02