Cam Bearing Information for Side Oiler Blocks
| Federal Mogul # 1267M C5AZ-6A251-A (Ford Assy#) |
Looking at the Front of the Block with Block Upside Down | |
| Position #1 2301DRA C3AZ-6261-A |
2 holes open, 10 & 12 | Right Angle oil groove to front and also recess brg. .005 to .020 into block from front. Both holes in cam brg used in this application |
| Position #2 3216DR C5AZ-6267-A |
2 holes open, 9 & 12 | both holes in cam brg used in this application. Camshaft must have groove in this bearing journal |
| Position #3 3217DR C5AZ-6262-C |
1 hole open at 12 and one closed at 9 | Only 1 of 2 holes in cam brg used on the application |
| Position #4 3218DR C5AZ-6270-A |
2 holes open, 1at 12 and 1 at 3 and 1 closed at 6 | Only 2 of 3 holes in cam brg used in the application. Camshaft must have groove in the bearing journal. |
| Position #5 3219DR C5AZ-6363-A |
1 hole open at 12 and 1 hole closed at 9 | Only 1 of 2 holes in cam brg used in this application |
The Cam Bearings for the regular non-side oiler FE Block are Part Number 1445M, these bearings have 2 holes in front #1 (same as side oiler) and the rest have only one (1) oil hole.
1445M On The Left & 1267M On The Right
