Tony Paton Project 2007
 

 

 

 

SECTION 1

Parts Received from Tony. 

 

 

 

 

 

SECTION 2

Edelbrock Heads arrive
 

 

 

SECTION 3
Blue Thunder Intake due in 3/__/2007

 

 

SECTION 4

Clay Smith Components arrive

 


 

3/21/07 FPP Rockers and Push Rods will work, we will setup for the Edelbrock heads.

Paton-07193.JPG (141615 bytes) Boxed up with Rockers Installed for you 3/27/07

 

 

Paton-06850.JPG (142870 bytes) Paton-06851.JPG (141166 bytes) Paton-06852.JPG (140170 bytes) Paton-06853.JPG (132884 bytes) Paton-06855.JPG (145622 bytes) Paton-Rockers-06845.JPG (153083 bytes) Rockers have 3/8" Cup and do fit the Edelbrock heads


Current Push rods are 9.157 Standard Ball to Cup

The Ford Power Parts Push Rods are 9.500" 5/16 Ball to 3/8" Ball 

Used FE lifter on left and new on right - Lifters are normal FE Hydraulic Lifters

Paton-06703.JPG (152678 bytes)  Paton-07167.JPG (29456 bytes) Guide fitting 3/27/07

 

 

 

 Intake Picture Soon - Intake arrived 3/12/07 - Picture shortly

Paton-07164.JPG (149409 bytes)  Pressure Check (OK) Surface OK 3/26/07Paton-07165.JPG (129730 bytes)

Intake shipped UPS 3/26/07

 

Paton-06869.JPG (36951 bytes) 3/12/07